You may be interested in…
Kerlink POE Injector KLK03506 – 30 W Indoor – AC Input – KLK03506
$67.00
- 10/100/1000Base-T/ 2.5GbE/5GbE NBASE-T
- PoE Output Power: 30 Watts over 4 pairs
- PoE Output Voltage: 55 VDC
- Electromagnetic Emission & Immunity: FCC Part 15, Class B
- Safety Approvals: UL/EN/IEC 60950-1, UL/EN/IEC 62368-1, KLK03506
3 in stock
This PoE injector is a 30W single port solution
for remote powering the Kerlink’s Wirnet range by AC power supply.
One RJ45 port is for Ethernet input, the other is for Ethernet output + Power.
Two LEDs have diagnostic functions. One “POWER” is for Input Power (green), the other “ACTIVE” is for Output Power (green up to 15,4W and blue above).
for remote powering the Kerlink’s Wirnet range by AC power supply.
One RJ45 port is for Ethernet input, the other is for Ethernet output + Power.
Two LEDs have diagnostic functions. One “POWER” is for Input Power (green), the other “ACTIVE” is for Output Power (green up to 15,4W and blue above).
Kerlink POE Injector – 30 W Indoor provides 55Vdc, 0.55A with input AC voltage (up to 30W) over the full temperature range -40°C to 65°C.
Automatic Detection and Protection of non- standard Ethernet terminals implemented.
It is provided with B type cable (US).
Common DC Characteristics:
- Supply Voltage: built in 4000mAh Li-SOCI2 battery , 2.5v ~ 3.6v
- Operating Temperature: -20 ~ 65°C
CO2 Sensor:
- Target gas: Carbon dioxide(CO2)
- Operating principle: Non-dispersiveinfrared(NDIR)
- Operating range: 0-50°C, 0-85% RH(non-condensing)
- Measurement range: 400ppm to 5000 ppm (extended range up to 10000 ppm )
- Accuracy: Typ ±(50 ppm +3% of reading)
- Pressure Compensation
Temperature Sensor:
- Range: -20 ~ 65 °C
- Accuracy: Typ ±1.0@ 0-65 °C
- Resolution: 0.01°C
Humidity Sensor:
- Range: 0 ~ 99.9% RH
- Accurancy: ± 3%RH (20 ~ 80%RH)
- Resolution: 0.008% RH
- Long term stability: 0.5 %RH/yr
Air Pressure:
- Range: 300~1100hPa
- Accuracy: ± 1.0 hPa (0-65 °C)
- Resolution: 0.18Pa
- Long term stability: ±1.0 hPa/yr
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 4000mAh
- Self-Discharge: <1% / Year @ 25°C
Power Consumption:
- Sleep Mode: 6uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
