Dragino PS-LS-NA LoRaWAN Analog Sensor
$88.00
- US915 Support
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- 1 x 0~20mA input , 1 x 0~30v input
- 5v and 12v output to power the external sensor
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- Uplink on periodically
- Downlink to change configure
- Solar panel + 3000mAh Li-ion battery
The Dragino PS-LS-NA is a LoRaWAN Analog Sensor for the Internet of Things solution. PS-LS-NA has 5v and 12v output, 4~20mA, 0~30v input interface to power and gets value from Analog Sensor. PS-LS-NA will convert the Analog Value to LoRaWAN wireless data and send it to the IoT platform via the LoRaWAN gateway.
The LoRa wireless technology used in PS-LS-NA allows the device to send data and reach extremely long ranges at low data rates. It provides ultra-long-range spread spectrum communication and high interference immunity while minimizing current consumption.
PS-LS-NA supports BLE configuration and wireless OTA update, which makes users easy to use.
PS-LS-NA is powered by a solar powered + Li-ion battery; it is designed for long-term use for up to 5 years.
Each PS-LS-NA is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to the local LoRaWAN server, and it will auto-connect after powering on.
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- Measure air / gas or water pressure
- Different pressure range available
- Thread Installation Type or Immersion Type
- Monitor Battery Level
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- Uplink on periodically
- Downlink to change configure
- Built-in 0.9w solar panel
- 3000mA Li-on Battery power
Micro Controller:
-
- MCU: 48Mhz ARM
- Flash: 256KB
- RAM: 64KB
Common DC Characteristics:
-
- Supply Voltage: 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
LoRa Spec:
-
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Current Input Measuring :
-
- Range: 0 ~ 20mA
- Accuracy: 0.02mA
- Resolution: 0.001mA
Voltage Input Measuring:
-
- Range: 0 ~ 30v
- Accuracy: 0.02v
- Resolution: 0.001v
Battery:
-
- Li/SOCI2 un-chargeable battery
- Capacity: 3000mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
-
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Dimensions and Weight:
Device:
- Size:120 x 120 x 30 mm/pcs
- Weight: 187g
Package:
- Size:145 x 135 x 60 mm/pcs
- Weight: 300g
